Cart
0
Water Quality Indicator
The built-in sensor is used to test the water quality when the system starts working, and shows the water quality status or faults on the front panel (Figure 21).
Water Quality Display Status
|
Water Quality Status |
Light |
|
Normal |
Blue |
|
Average |
Purple |
|
Poor |
Red |
Filter Life Indicator
NOTE: Filter life may vary depending on water quality and usage. Please be reminded to replace the filter according to the filter life indicators.
Filter Life Display Status on System
|
Status |
Remaining Life (Day) |
Remaining Capacity (G) |
Indication |
|
|
Light |
Buzzer |
|||
|
Good |
>15 |
>40 |
Blue |
N/A |
|
Replace Soon |
≤15 |
≤40 |
Purple |
Two Beeps when dispensing water, (beep for 0.3 second and then stop for 1 second) |
|
Replace Now |
≤0 |
≤0 |
Red |
Keep beeping when dispenses water, (beep for 0.3 second and stop for 0.3 second) |
Filter Life Display Status on Faucet
Different colors of light will be displayed on the faucet based on different filter life status (Figure 24).
|
Light |
Remaining Life (Day) |
Remaining Capacity(G) |
Status |
|
Blue |
＞15 |
＞40 |
Good |
|
Purple |
≤15 |
≤40 |
Replace soon |
|
Red |
≤0 |
≤0 |
Replace now |
|
Blue Flash |
/ |
/ |
Flushing |
|
Red Flash |
/ |
/ |
Malfunction |
Function Display Status
|
Status |
Indication |
||||
|
Function |
Action Logic |
Light |
Buzzer |
||
|
First Usage (for Filters’ Cleaning) |
Automatic flushing for 5 minutes |
Red Flashing |
N/A |
||
|
Flushing for 30 minutes (turn on the tap); Save data every minute. |
Flashing according to actual Water Quality |
N/A |
|||
|
Flush for Filter Replacement |
After the filters are reset: 1.CF filter: Automatic flushing for 5 minutes. 2.RO filter: Automatic flushing for 5 minutes; turn on the tap and flush the filter for 30 minutes. 3.CB filter: Turn on the tap and flush the filter for 15 minutes. 4.The RO filter is reset together with other filters: Automatic flushing for 5 minutes; turn on the tap and flush the filters for 30 minutes. 5. Reset the CF filter and CB filter together: Automatic flushing for 5 minutes; turn on the tap and flush the filters for 15 minutes. |
1. Automatic flushing of the filters: Red Flushing
2. Turned on the tap: Flashing according to the actual Water Quality |
One beep for 1 second after the filter is reset |
||
|
Produce Water |
AWater1 RO Water Filter System produces water |
Blue |
N/A |
||
|
Standby |
AWater1 RO Water Filter System stops working and enters Standby Mode. |
Light off |
N/A |
||
|
Power On |
The buzzer beeps for 0.1 second, The indicator light displays for 3 seconds; |
Blue, Purple, Red light up for 1 second in turn |
One beep for 0.1 second |
||
|
After charging for 3 seconds, if the machine is not in the first flushing or filter replacement flushing state, the machine will flush for 20 seconds. |
Keep the color flashing before power outage |
One beep for 0.1 second |
|||
|
Trouble |
AWater1 RO Water Filter System does not work |
Booster Pump Overworked Protection |
Light off |
Continuous 0.3 second beeps with 0.3 second interval |
|
|
Booster Pump Frequent Starting and Stopping |
Light off |
Five 1 second beeps with 1 second interval |
|||
|
Water Leakage |
Red Flashing |
Five 0.3 second beeps with 0.3 second interval, and stop for 4 seconds. Beeping lasts for 3 minutes. |
|||
|
Low Water Temperature |
Red Flashing |
Five 1 second beeps with 1 second interval |
|||
|
Automatic Flushing |
No working time within 24 hours, automatic flushing goes for 20 seconds; if the user takes water during this period, it will switch to producing water. |
Keep the color flashing before flushing |
N/A |
||