STEP 1: After installation, before adding water, please check if all of the joints are sealed.

 

STEP 2: Open the filtered water faucet, let the water flow for at least 15 minutes, to wash the whole cabinet, until the outlet water is clean.

 

STEP 3: Close the filtered water faucet to check if there’s any water leakage. After the above-mentioned operations, this equipment can be used.

 

STEP 4: If there’s any water leakage condition, please turn off the inlet ball valve, repair the leaking place.

 

NOTE:

1. It is suggested to turn off the inlet water ball valve at night, and cut off the water source,in case the pressure change in the night that may damage inner parts of the equipment orcausing water leakage.
2. Each day, when first using this equipment, open the inlet valve and the faucet, it can beused normally after discharging 500ml of residual water.
3. If the water filter will not be used in a long time, please turn off the inlet valve.
4. It is normal to discharge black or white water for the first time.