Guide ForYour First Use

1.Turn the bottle to the right to depart it.
2.Push and take out the battery compartment, put 3AA batteries into.
3.Pour all liquid soap we give into the bottle, filling the bottle with water and shake up.
4.Turn the bottle to the left to tight.
5.Touch the top sensor switch to open the dispenser.
6.Put your hands under the dispenser to get foam.
7.Green light indicates open while red light means shutdown.

Liquid Soap Replacement Instruction

1.Turn the bottle to the right to depart it.
2.Pour the new liquid soap into the bottle.
3.Filling the bottle with water and shake up.
4.Turn the bottle to the left to tight.
5.Touch the top sensor switch to reset the dispenser.

NOTE:

1.We suggest you to choose liquid soap that is gentle to hands, and the dilution rate is water 5oz, liquid soap 2oz.
2.Please DO NOT add any solid or granular cleaning product into the bottle.
3.Touch the top sensor switch to open or shutdown the dispenser.
4.Green light indicates open while red light means shutdown.

Frequently Asked Questions

Q: Why the dispenser doesn t dispense foam any more?
A: Check if the batteries have power and if there is any liquid soap left.

Q: Why the dispenser doesn t work when the batteries and liquid soap have no problem?
A: Please check whether the sensor switch is ON?

Limited Warranty

The Besdor Intelligent Sensor Automatic Foaming Soap Dispenser provides a 1-year warranty from the original date of purchase. If something goes wrong within 1 year from the date of purchase, please contact email: support@besdor.com, we ll try our best to help you. During the warranty period, we will replace or repair any part that is deemed to be defective if the product has not been altered, repaired and used improperly. The product is not warranted against misuse, including use in conditions listed outside the operating parameters. Solid or granular cleaning product cannot be used for this product. We are not responsible for the cost of transportation and the damage in transit; claims for such damage should be presented to the carrier by the customer.If you have any questions or need any service regarding ourproduct, please contact our customer service email: support@besdor.com.