index

Whole house water-using appliances firewall

High filtration accuracy of 40 microns, ideal range for whole-house filtration, not easy to be clogged

Fully automatic flushing, one key to set the timing, three gear selection, free hands, no need to replace the filter element for life, repeated use

SWater 3 has a 100-micron backwash filter to ensure that the backwashed water is also filtered.

  • Full-automatic Backwash
  • 20 GPM Large Flow
  • Lead-free Copper Head
  • BPA Free
  • Explosion-proof
  • Anti-freeze at -22℉

High-precision 316L stainless steel double filter mesh

Using high-quality food-grade stainless steel, strong corrosion resistance, not easy to deform, non-toxic, non-rusty, the cross-sectional area of the filter element is large, which increases the water flow per unit time and improves the filtering effect; the filter support frame is made of food-grade material.

  • Remove sediment
  • Remove rust
  • Remove debris
  • Remove grit

20 GPM Large Flow

Fast water output meets the needs of kitchen water, shower water and washing water at the same time, it’s suitable for any household.

Lead-free copper material

Lead-free dissolution, anti-oxidation and corrosion-resistant, ensuring healthy drinking water and prolonging service life.

Macromolecule Transparent Filter Bottle

Macromolecule transparent explosion-proof antifreeze filter bottle.

  • -22℉ (-30℃) Freeze-Proofing.
  • Can withstand a burst pressure of 900psi.
  • BPA FREE
  • After a long time of water hammer impact test. 

Transparent and visible, intuitive machine working status, easy to observe filter impurities in time.

Smart Touch Setting Automatic Backwash

You can set the backwash periods, there are 3 levels available, which frees your hands and installation position will not affect the cleaning. Double-sided 360-degree scraping cleaning, inner scraping filter screen, outer scraping filter bottle. Pay attention to automatic backwash needs 3 AAA batteries (not included in the package).

Double-sided 3d Scraping

Inner scraping filter screen, outer scraping filter bottle. The scraper sticks to the surface of the filter screen and the inner wall of the filter bottle, double-sided scraping 360 degrees without dead angles, such as the continuous friction of the car wiper, prevents the filter from clogging and prevents secondary pollution.

Easy to Install

Just install SWater 3 at the water inlet pipe according to the direction of the water flow.

The package contains a waste water pipe, which needs to be connected to the sewer or waste water bucket.

The filter is supplied with 1" MNPT, 3/4" FNPT, and 3/4" MNPT.

 

Besdor SWater 3 Full-automatic Backwash Spin Down Sediment Filter